Sun Club

The Sun Club comfort protection plan saves homeowners throughout the Houston area money on energy, maintenance and repairs, while improving system performance and extending equipment lifespan. Our trusted and experienced technicians will proactively schedule 2 preventative maintenance calls per year. The first planned visit in the spring to ensure that your cooling system is ready for the hot and humid summer. The second planned visit for the year will be scheduled for the fall to verify that your heating system is operating safely before the first cold front arrives. Additionally, Sun Club members enjoy the following benefits as perks to maintaining your system twice per year:

1. 10% discount on all service repair parts and Freon charges

2. 5% discount on all new equipment installations, up to a $1,000 value

3. Upgrade to a 1 to 3 year parts and labor warranty on air conditioning repairs

4. Priority response emergency A/C service.

5. Preferred scheduling for all other air conditioning repairs and maintenance

6. Maintains validity of equipment manufacturer’s warranties.

Seasonal Evaluation & Precision Tune-Up

Fall Furnace / Heating Inspection & Tune-Up

Confirm system operation, cycle through thermostat; ensure the equipment is operating from the thermostat
Check system ignition
Clean and adjust pilot safety assembly
Perform routine tests for combustion or gas leaks
Check & adjust combustion for optimal fuel efficiency
Check and safety test all wiring and connections
Check & clean gas burners and orifices
Inspect heat exchanger for cracks and corrosion
Check flue pipe for satisfactory operation, clear obstructions if needed
Replace air filters with customer provided filters
Lubricate all motors and moving parts as needed
Check blower belt wear, tension, and alignment; adjust blower speed if necessary on direct drive blowers
Check gas valve operation
Check for proper temperature rise & high limit operation

LEARN MORE

Seasonal Evaluation & Precision Tune-Up

Spring A/C Inspection & Tune-Up

Confirm system operation, cycle through thermostat; ensure the equipment is operating from the thermostat
Install gauges and check refrigerant level, operating pressure and temperatures
Measure superheat and subcooling and adjust if necessary to fine-tune the refrigerant charge for optimal cooling
Check expansion valve and coil temperatures
Inspect refrigerant connections and search for major oil or refrigerant leaks visually
Clean the condenser coil
Inspect start and run capacitors for bulges, rusting or leaks
Safety test all controls and relays for proper operation
Inspect tension and condition of blower belts; Adjust blower speed if necessary on direct drive blowers
Lubricate all motors and moving parts as required
Test operation and condition of compressor contacts
Inspect and safety test all wiring and connections
Check voltage and amperage of motors; Test for worn bearings
Evaluate air filter condition; clean or replace with customer supplied filters
Flush condensate drain to protect against overflow
Test differential temperature or “temperature drop” between supply air and return air
Inspect condition of evaporator coil and drain pan if accessible

LEARN MORE

How can we help?

REQUEST SERVICE

or call us 281-499-3916

Sun Club

1. 10% discount on all service repair parts and Freon charges

2. 5% discount on all new equipment installations, up to a $1,000 value

3. Upgrade to a 1 to 3 year parts and labor warranty on air conditioning repairs

4. Priority response emergency A/C service.

5. Preferred scheduling for all other air conditioning repairs and maintenance

6. Maintains validity of equipment manufacturer’s warranties.

Seasonal Evaluation & Precision Tune-Up

Fall Furnace / Heating Inspection & Tune-Up

Confirm system operation, cycle through thermostat; ensure the equipment is operating from the thermostat

Check system ignition

Clean and adjust pilot safety assembly

Perform routine tests for combustion or gas leaks

Check & adjust combustion for optimal fuel efficiency

Check and safety test all wiring and connections

Check & clean gas burners and orifices

Inspect heat exchanger for cracks and corrosion

Check flue pipe for satisfactory operation, clear obstructions if needed

Replace air filters with customer provided filters

Lubricate all motors and moving parts as needed

Check blower belt wear, tension, and alignment; adjust blower speed if necessary on direct drive blowers

Check gas valve operation

Check for proper temperature rise & high limit operation

Seasonal Evaluation & Precision Tune-Up

Spring A/C Inspection & Tune-Up

Confirm system operation, cycle through thermostat; ensure the equipment is operating from the thermostat

Install gauges and check refrigerant level, operating pressure and temperatures

Measure superheat and subcooling and adjust if necessary to fine-tune the refrigerant charge for optimal cooling

Check expansion valve and coil temperatures

Inspect refrigerant connections and search for major oil or refrigerant leaks visually

Clean the condenser coil

Inspect start and run capacitors for bulges, rusting or leaks

Safety test all controls and relays for proper operation

Inspect tension and condition of blower belts; Adjust blower speed if necessary on direct drive blowers

Lubricate all motors and moving parts as required

Test operation and condition of compressor contacts

Inspect and safety test all wiring and connections

Check voltage and amperage of motors; Test for worn bearings

Evaluate air filter condition; clean or replace with customer supplied filters

Flush condensate drain to protect against overflow

Test differential temperature or “temperature drop” between supply air and return air

Inspect condition of evaporator coil and drain pan if accessible

How can we help?

Company

Resources

Air Conditioning

Heating

Location

Serving these Communities

Connect with Us